Broan B5936SS Installationsanleitung PDF herunterladen (Seite 7)

MODEL B5936SS

Page 7

FRONT

9. Attach the hood assembly to the ceiling bracket using (8)

M4 x 10mm machine screws (2 for each support leg).

10. Connect power cable to house wiring. Black to Black,

White to White, and Green to Green or Bare wires. Secure

power cable to wiring box with appropriate connector.

(8) M4 x 10mm

PAN HEAD

MACHINE

SCREWS

11. Slide the inner flue up to the ceiling and secure with (4) M4

x 8mm sheet metal screws.

12. Remove the protective coating from the hood and the

outer flue.

(4) M4 x 8mm

SHEET METAL

SCREWS

13. Remove the grease filters by pulling down the metal latch

tab and tilting the filters downward to remove.

14. Install the non-duct recirculation filter as shown. Turn

mounting tabs on hood to secure filter.

15. Reinstall grease filters by aligning rear filter tabs with

slots in the hood. Pull down the metal latch tab, push filter

into position and release. Make sure filters are securely

engaged after installation.

METAL

LATCH

GREASE

FILTERS

NON-DUCT

RECIRCULATION

FILTER

NON-DUCT

FILTER

MOUNTING

TABS

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Keine Kommentare

Broan B5936SS Installationsanleitung Seite 7