Broan B5936SS Installationsanleitung PDF herunterladen (Seite 4)

MODEL B5936SS

Page 4

(8) M4 x 10mm

PAN HEAD

MACHINE

SCREWS

1. Assemble (4) angle brackets to the lower hood mounting

locations using (8) M4 x 10mm pan head machine screws

(2 for each angle bracket).

5. Measure the length of 6” round metal duct required from

the damper / duct connector to the ductwork rough-in in the

ceiling. Connect the duct to the damper / duct connector

and seal with duct tape.

6. Remove the protective coating from the inner the flue. Turn

the inner flue so that the louvers are at the bottom. Carefully

slide the inner flue down into the outer flue. Slide the flues

over the angle brackets. Make sure the side marked “front”

faces the control side of the hood. Feed the power cable up

through the flues.

INNER

FLUE

OUTER

FLUE

METAL

DUCT

METAL

DUCT

TAPE

DAMPER /

DUCT

CONNECTOR

POWER

CABLE

INSTALL THE HOOD

(Ducted Installation Only)

2. Determine dimension “H” based upon ceiling height and

height of hood installation above cooktop:

8-ft. ceiling Hood 30” above cooktop H = 30”

Hood 32¼” above cooktop H = 27¾”

9-ft. ceiling Hood 30” above cooktop H = 42”

Hood 36” above cooktop H = 36”

10-ft. ceiling Hood 30” above cooktop H = 54”

Hood 36” above cooktop H = 48”

For 10-ft. ceilings: Purchase a 10-ft. flue extension (Model

FXN59SS) which includes (4) additional angle mounting

brackets, (1) longer upper flue, and additional mounting

hardware.

3”

3. Attach the upper set of (4) angle brackets to the outside of

the lower angle brackets according to dimension “H”. Use

(16) M4 x 10mm pan head machine screws and (16) M4

serrated flange nuts (4 at each angle bracket connection).

4. Attach the angle bracket assemblies to the upper hood

mounting locations using (8) M4 x 10mm pan head machine

screws (2 for each angle bracket).

For 10-ft. ceilings: Attach a third set of (4) angle brackets

to the inside of the second set of angle brackets using

hardware supplied.

(16) M4 x 10mm

PAN HEAD

MACHINE

SCREWS &

(16) M4

SERRATED

FLANGE NUTS

LOUVERS

(8) M4 x 10mm

PAN HEAD

MACHINE

SCREWS

1 2 3 4 5 6 7 8 9 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Broan B5936SS Installationsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Dunstabzugshauben Broan B5936SS