18
Location: Located in the bathroom or in other locations where there is temporary
excess humidity or pollutants.
Purpose: To eliminate excess humidity produced by showers or other periodic
activities producing pollutants.
20-MINUTE PUSH-BUTTON TIMER:
(AVAILABLE ONLY FOR HRV100H AND HRV200H MODELS)
Activate the push-button.
Results expected:
1. Motor speed: High for 20 minutes.
2. Indicator light goes “ON”.
3. Air exchange indicator light goes “ON” (VT2W wall control
only).
20/40/60-MINUTE PUSH-BUTTON TIMER:
(NOT AVAILABLE FOR HRV100H AND HRV200H MODELS)
Activate the push-button. Within 2 seconds, push once for 20 minutes,
twice for 40 minutes or three times for a 60-minute activation.
Results expected:
1. Motor speed: High for 20, 40 or 60 minutes.
2. Indicator light goes “ON” and flashes every 5 seconds (one
time to indicate a 20-minute operation, two times for a
40-minute, and three times for a 60-minute operation).
3. Air exchange indicator light goes “ON”
(VT2W wall control only).
NOTE: To stop activation, push one more time.
60-MINUTE CRANK TIMER:
Activate the timer.
Results expected:
1. Motor speed: High for either 20, 40 or 60 minutes.
2. Air exchange indicator light goes “ON”
(VT2W wall control only).
High speed activation time Position of dial
20 minutes 1 to 19
40 minutes 20 to 39
60 minutes 40 to 60
2.8 USING THE OPTIONAL CONTROLS
20 min.
40 min.
60 min.
Kommentare zu diesen Handbüchern