Broan NTM302SS Gebrauchs- und Pflegehandbuch

Broan-NuTone LLC; Hartford, Wisconsin www.nutone.com 1-888-336-3948 Broan-NuTone Canada Inc.; Mississauga, Ontario www.nutone.ca 1-877-896-111

Do:• Regularly wash surfaces with clean cloth or rag soaked withwarm water and mild soap or liquid dish detergent.• Always clean in the direction of o

MHE0112AMCONTROL PANELKEY SWITCH12 V /20 W X 2GREENGREENWHITEWHITEYELLOWYELLOWWHITEGREENLAMPSBLACKNEUTRALGROUNDLINEBLACKWHITECCBLACKBLACKBLUEBLUEGRE

BROAN-NUTONE CANADA INC.One Year Limited WarrantyBroan-NuTone Canada warrants to the original purchaser of its products that such products will be fre

! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, ORINJURY TO PERSON(S) OBSERVE THE FOLLOWING:1. Use this unit only in the manner intended by the manufact

VERTICAL DISCHARGE USING 6” ROUND DUCTVERTICAL DISCHARGE USING 3¼” X 10” DUCTHORIZONTAL DISCHARGE USING 3¼” X 10” DUCT-3-1. INSTALL DUCTWORKChoose whe

-4-2. PREPARE THE INSTALLATIONMake sure the following items are included:- Hood- Adapter/dampers: Horizontal 3¼” x 10”, vertical 3¼” x 10” and vertica

2. Remove both electrical box cover retaining screws. Remove cover and set aside withscrews. Turn the hood over and punch out the wiring knock-out loc

1. Remove the large shutoff plate 5 retaining screws located on the BACK of the hood.Discard the shutoff plate and its screws.2. Remove the small shut

-7-WARNINGRisk of electrical shock. Electrical wiring must be done by qualified personnel in accordance with all applicablecodes and standards. Before

-8-6. LIGHT BULBSThis range hood requires two UL approved halogen bulbs (JC type, 12 V, 20 W, G4-base), included.To replace bulbs:1. Carefully insert

2. Disengage the small grease guard cups from the metal guards by turning counterclockwise and remove.3. Remove the screw retaining the metal guards t